Get a Free Quote
02

High Speed Automatic 3Ply
Flute Laminator Machine

Specifications

Three-way of top sheet loading

  • Pre- stacking loading: for sheet uneven stacking or with static electricity, manual pre-stacking on pre-loading platform, and keep the job-change over within 3mins.
  • Whole pallet loading: adopt the whole pallet loading design to save the manpower and time. After the pallet is loaded against the gear gauge, aligning the zero position to make left and right adjustment
  • Separate manual stacking: when the platform descend, manual stack the paper on the pallet.

Feeding lifting pile plate

  • the lifting platform is controlled by 4 sets of double chains to ensure the smooth and safety operation.
  • 10 limits and protective sensors, real-time detection and adjustment to ensure safety production.
  • Industry Initiative of servo control lifting platform, single sheet lifting same as offset printing press, without wear, and can be set as from 1~50 sheet/lifting.

High speed shaft-less feeder

  • Industry Initiative of high speed shaft-less feeder, smooth feeding, maintenance-free, max speed up to 22,000sheet/hour.
  • The correction system of paper feeding ensure the high speed feeding smoothly without any skew.
  • The sheet delivery stopper make sure the single sheet feeding, optional to upgrade by adding double sheet detection system.
  • Becker vacuum pump with large suction, strong blowing, good stability and durable.

Space for bottom sheet feeding part

  • Space of bottom sheet feeding part is 3m(option shorten to 2.3m), large working space, available for more pallets place

Patened leading edge bottom feeder

  • Industry Initiative of leading edge bottom feeder, suitable for a variety of warped deformation, rough and heavy bottom board feeding.
  • Unidirectional rotation feeding roller, without wear, life cycle up to 10 years.
  • Standard equipped with right cylinder to pile up the paper in neat, available to adjust in a whole or on the right side, greatly saving manpower.
  • Patented non-stop suction with 5.5KW power, air flow adjustable at will.

Belt bottom feeder

  • Extra heavy wear-resistant belt, suitable for cardboard/flute laminating, without scratch in conveying.

Driving System

  • Using 60mm extra widening timing belts to instead of traditional wheel chain, make sure the synchronous wheel and timing belt perfect transmission, truly achieve zero wear, and ensure the lamination in high accuracy at any time.
  • Industry initiative of double bearing design, effectively extend the life span of the bearings.
  • Industry initiative of auto bearing oiling injection system, maintenance free to saving manpower.

Technical Specifications

Models GW–1450L/ GW-1450B GW–1700L/ GW-1700B GW–2200L/ GW-2200B
Max.Sheet Size (W x L)  1450mm x 1450mm 1700mm x 1650mm  2200mm x 2100mm
Min.Sheet Size (W x L) 360mm x 360mm 360mm x 360mm 450mm x 380mm
Bottom Paper Sheet Thickness GW-1450L/1700L/2200L:   Approx 400gsm(0.55mm)–10mm
GW-1450B/1700B/2200B:  Approx 250gsm(0.35mm)–10mm
Upper Paper Sheet Thickness Approx 120g–700g (for 3ply paper, maximum 3ply E flute )
Normal Working Speed 16,000 Sheets/hour (165M/Min)
Laminating Accuracy            ±1.0mm (Standard Sheet Paper)
Applicable Glue Resin adhesive, starch glue and etc. (PH6~8 will be suitable for laminating glue)
Machine Weight 8000kg 8500kg 9000kg
Dimension (LxWxH) 15700mm *  2400mm * 2550mm 16500mm*2650mm* 2550mm 18500mm* 3050mm *2880mm
Voltage                  380VAC/3P
Power 26kw 30kw 32kw


    This will close in 0 seconds