Get a Free Quote
02

Automatic Foil Stamping & Die cutting Machine

Automatic Foil Stamping & Die cutting Machine

Machine Stamping: Automatic Diecutting Creasing and Embossing Machine with Foil
Model: EFOIL 1050

Specifications

Feeder

  • Improved preloading design for easy loading onto main pallet directly with pallet jack.
  • Powerful four pickup/four forward suction heads to ensure smooth transport.
  • Patented turbo spiral air blower for better sheet lift.

Feed Table Section

  • Slanted Feed Table to obtain stable and accurate registration, especially for lightweight paper at high speed.
  • Side lays on both left- and right-hand sides push and pull easily convertible.
  • Sheet slow down device of feeding belts with selective on/off switch to ensure accurate registration of the sheet at front lays.

Die-Cutting & Stamping

  • Carefully and expertly calculated upper and mobile platen structures design, to reduce its weight and improve strength, thus reduce make-ready time and increase productivity;
  • Electrically controlled impression on/off, coupled with precision working pressure measurements, to be displayed on screen to greatly reduce any guess work and give operation much better situation awareness

Non-Stop Impression On

  • Impression On function can be switched on in high speed, without stopping the machine (actual speed automatically set depends on working pressure). Greatly reduce the number of wasted sheets and burnt foil due to machine stop/start cycle and increase productivity.

Foil Feeding System

  • Two servo motor (3.5KW) driven longitudinal foil advancing shafts each individually programmable for short and long foil stepping (3rd shaft optional), and each individually equipped with a holographic foil mark reading photo sensor (Optional).

Cross Foil System ( Optional )

  • Two optional cross foil shafts driven by 3.5KW high torque servo motors with high degree of precision.
  • Pneumatic Rewinder with one button release for easy operation.

Micro Adjustment in Both Running and Cross Directions

  • 5mm hardened stamping plate or 3.5mm + 1.5mm sandwich plate on top of 15 mm precision ground support base plate with -/+ 0.9 mm micro adjustment in both running and cross directions for quick set up and easy make ready.

Waste Foil Ejection Brush

  • Two rows of synchronized, servo driven waste foil ejection brush for smooth waste foil ejection.

Hologram Stamping System

  • Optional hologram stamping readers for precision hologram mark reading

Delivery Section

  • Safety photocell sensors to ensure operator safety.
  • Tape Inserter with counter.
  • Adjustable segmented pressing brushes and sheet flattening blower to ensure stable sheet piling.
  • Gripper bar drive chain tension adjustment.

Waste Foil Collections Systems ( Optional )

  • Optional three shaft Waste Foil Collection System specially designed for rewinding narrow waste foil strips (20-40 mm wide);
  • Optional free standing waste foil rewinder with 6 torque motor driven shafts and 6 dancing rollers for persistent tension control.

Standard Equipment

feeder